30kw Mobile Light tower

Mobile Light Tower · 30 kW Prime / 33 kW Standby

30 kW Mobile Light Tower for Sites Without a Reliable Grid

One platform, four build types — open frame, silent canopy, containerized or trailer-mounted — configured to your site, your fuel and your duty. Tell us the load and the site, and we will confirm the build type, rating and lead time.

30 kWPrime power33 kWStandby power380/220 VRated voltage50 HzRated frequency1500 rpmRated speedIP23Protection grade

Request a QuoteView Specifications

Manufacturing since 20062,000+ sets delivered100+ countriesLoad-tested before shipment

Mobile light tower · unrestricted service accessDiesel & gas · 10–3,750 kVA · 100+ countries

30 kW Prime power

33 kW Standby power

380/220 V Rated voltage

2006+ Manufacturer since

Product overview

Heavy-duty mobile light towers for sites without a reliable grid

One road-towable lighting tower package, 30 kW prime and 33 kW standby (38 kVA), aimed at small commercial and light industrial.

This 30 kW Mobile Light Tower is specified for workshops and repair bays, guesthouses and small clinics, water pumps and irrigation. Typical duty for the 30 kW set is intermittent prime duty with frequent start-stop cycles, feeding light single-unit distribution boards.

Assembly and full-load testing take place on Outevo’s own lines. The company has built diesel and gas sets including this 30 kW class generator sets since 2006 at a 20,000 m² manufacturing facility served by a fully automatic line; over 2,000 sets have shipped to more than 100 countries.

The 30 kW package is protected to IP23 or higher and can be uprated for dust, humidity, rain or heat.

• ✓30 kW prime / 33 kW standby at 380/220 V, 50 Hz, 1500 rpm
• ✓Full service access — routine work carried out without unhitching
• ✓Tier-1 diesel engine platforms — Cummins, Perkins, Weichai and Yuchai
• ✓Closed water-cooling with forced fan and large-capacity water tank
• ✓IP23 or higher, upgradable for dust, humidity, rain and heat

Product features

Engineered for site conditions, not for the showroom

Heavy-Duty Mobile Light Tower Construction

A single trailer chassis carries the 30 kW diesel set and the lighting mast, which folds down for towing.

30 kW Prime / 33 kW Standby Duty

30 kW prime / 33 kW standby at 380/220 V, 50 Hz, 1500 rpm — 38 kVA. Duty assumed for the 30 kW set is intermittent prime duty with frequent start-stop cycles, feeding light single-unit distribution boards.

Tier-1 Diesel Engine Platforms

The 30 kW set can be built on diesel platforms from Cummins, Perkins, Weichai and Yuchai, engine matched to alternator, with alignment and full-load testing in our own facility.

Closed Water-Cooling with Forced Fan

Cooling on the 30 kW set is closed-circuit water with a forced fan and generously sized tank, keeping temperatures steady in long runs and hot conditions.

Industrial Protection and Environmental Adaptability

Sealing and anti-corrosion treatment take the 30 kW package to IP23 or higher, with higher ratings on request, so it stays in service through dust, rain, snow and temperature swings.

Flexible Configuration and Fast Deployment

For the 30 kW unit, ATS, remote monitoring, cable winch and quick connectors shorten wiring and starting; mounting and control settings follow your project specification.

Specifications

Technical data — 30 kW mobile light tower diesel generator set

Standard road-towable lighting tower configuration at 30 kW prime / 33 kW standby (38 kVA). Ratings, voltage and frequency are confirmed at specification.

Generator SetEngine & AlternatorControl & CoolingDimensions & Logistics

Related parameters	Parameter values
Power Capacity	Prime Power: 30 kW   Standby Power: 33 kW
Rated Voltage	380/220 Volts
Rated Current	Issued with the approved data sheet for the selected build
Rated Frequency	50 Hertz
Rated Speed	1500 rpm
Fuel Type	Diesel
Protection Grade	IP23 or higherUpgradable upon customization

Engine & alternator	Specification
Engine platform, standard	The engine platform for your order is confirmed at the specification stage
Alternative platforms	Cummins, Perkins, Weichai or Yuchai — the platform for your order is confirmed at order stage
Alternator	4-pole brushless, AVR-controlled — matched to the rating
Alternator brand options	Stamford, Leroy-Somer, Mecc Alte or Faraday
Matching	Engine, alternator and control system are matched to the rating and load profile you specify

Control & cooling	Specification
Cooling system	Closed water-cooling with forced cooling fan and large-capacity water tank, for stable temperature control under continuous load
Radiator design ambient	50 °C
Fuel system	Day-tank and fuel-system arrangement confirmed with the project specification
Control & protection	Configured to your project specification; optional automatic transfer switch (ATS) for automatic standby start, optional remote monitoring module
Ingress protection	IP23 or higher, upgradable upon customization

Dimensions & logistics	Value
Outline, mobile light tower (L × W × H)	Issued with the approved dimensional drawing for the selected build
Outline, silent canopy (same rating)	Issued with the approved dimensional drawing for the alternative build
Base frame	Fabricated steel skid, side-mounted mobile light tower layout
Net / gross weight	Supplied with the approved dimensional drawing and data sheet for your build
Container loading (20GP / 40HQ)	Supplied with the approved data sheet for your build
Basis	Standard mobile light tower configuration at this rating; refer to the approved dimensional drawing before installation design

The figures above describe the standard road-towable lighting tower build at 30 kW prime (38 kVA). Confirm the 30 kW build against the approved drawing and data sheet for your build before installation design.

Request the data sheetPrint this page

Engine & options

Specify the engine platform, control scheme and build

Engine platform Cummins · Perkins · Weichai · Yuchai The 30 kW rating can be built on any of these Tier-1 platforms, each matched to the alternator; the platform is confirmed when the order is placed.

Control & protection ATS & remote monitoring For the 30 kW set, ATS for automatic standby starting and an optional remote monitoring module are available. Control and protection logic follows the project specification.

Build configuration This model ships as a road-towable lighting tower This model ships as a road-towable lighting tower. Fixed and containerized lighting packages are available across the range under OEM/ODM terms.

Applications

Where this 30 kW mobile light tower is used

1. Retail units For retail units and small offices the 30 kW rating covers small commercial and light industrial at intermittent prime duty with frequent start-stop cycles. The load is usually single-phase and three-phase mixed, so the set is configured with a distribution board matched to the 30 kW rating.

2. Workshops Where workshops and repair bays is the load, the 30 kW rating is normally specified at intermittent prime duty with frequent start-stop cycles. Motor starting is light, so a modest step-load margin is enough at 30 kW.

3. Guesthouses The 30 kW mobile light tower set suits guesthouses and small clinics. Duty on the 30 kW set is intermittent prime duty with frequent start-stop cycles. Duty on the 30 kW set is intermittent, so fuel autonomy is sized around shift patterns rather than continuous run.

4. Water pumps Water pumps and irrigation is a standard application for the 30 kW unit, which runs at intermittent prime duty with frequent start-stop cycles. Ambient around the 30 kW set is often unshaded, so the radiator and enclosure are specified for high daytime temperature.

5. Small cold rooms The 30 kW set is commonly applied to small cold rooms at intermittent prime duty with frequent start-stop cycles. Noise is a factor on residential sites, so canopy options are considered at the 30 kW rating.

6. Construction hoists For construction hoists and small tools the 30 kW rating covers small commercial and light industrial at intermittent prime duty with frequent start-stop cycles. Access to the 30 kW skid is usually tight, so the skid footprint and lifting points matter as much as output.

Compare configurations

Open frame, silent or containerized?

Whichever build is chosen for the 30 kW rating, engineering and testing are identical; only the enclosure, access and transport change.

Consideration	Mobile light tower (this model)	Silent	Containerized
Enclosure	Open steel base frame, no canopy	Soundproof canopy	40HQ container shell
Service access	Unrestricted — no panels to remove for routine maintenance	Through canopy access doors and monitoring windows	Through container doors and reserved access panels
Noise control	Not attenuated — mobile light tower layout	Multi-stage silencing structure and sound-absorbing materials	Container shell combined with silencing
Weight and transport	Lightest of the three builds	Heavier than mobile light tower	Container handling and ocean freight
Typical duty	Prime power on site; standby for factories and buildings	Noise-sensitive locations such as residential, commercial and healthcare sites	Rapid transport and deployment, remote and long-duration sites
Rated power of this model	30 kW prime / 33 kW standby	Quoted per project	Quoted per project
Protection grade	IP23 or higher, upgradable	Upgradable upon customization	Upgradable upon customization
Minimum order quantity	1 set	Quoted per project	Quoted per project

This model · 30 kW mobile light tower

Range · 10–3,750 kVA

Diesel & gas

Open frame · silent · containerized · mobile

All mobile light tower sets

Give us the power for the 30 kW set, voltage and frequency and we will come back with a configuration.

FAQ

Frequently asked questions about this 30 kW mobile light tower

What power rating does this generator set provide?

This unit is rated 30 kW prime / 33 kW standby (38 kVA) at 380/220 V, 50 Hz, 1500 rpm. Rated current is stated on the approved data sheet for the selected build, because it follows the voltage and power factor confirmed for the project.

Which diesel engines are available for this set?

This 30 kW set is available on Cummins, Perkins, Weichai and Yuchai platforms. The engine is matched to the alternator at the 30 kW rating and the complete set is aligned and full-load tested in our own works, so the platform for your order is confirmed at specification stage rather than assumed.

Mobile Light Tower, silent or containerized — how do I choose?

Enclosure choice follows site conditions rather than rating. This page covers the road-towable lighting tower build; at 30 kW the same engine and alternator package can also be supplied in the other builds across Outevo’s 10–3,750 kVA range, with parallel operation is not normally required at this rating.

Can the voltage and frequency be customised?

Yes. 380/220 V and 50 Hz are the published standard for the 30 kW rating, but voltage and frequency are set to your project specification under OEM/ODM terms, including 60 Hz and medium-voltage requirements where the project calls for them.

What is the minimum order quantity?

One set. A single 30 kW unit can be ordered for a standalone site; where load growth or redundancy is expected, parallel operation is not normally required at this rating. Other ratings in the 10–3,750 kVA range are quoted per project.

How is the quality of each unit assured?

Every 30 kW set is assembled and load-tested on our own production lines before shipment, and travels with a data sheet and test record. Shanghai Outevo Machinery Co., Ltd. has manufactured diesel and gas generator sets since 2006 from a 20,000 m² manufacturing facility.

Get a quote

Configure your 30 kW mobile light tower diesel generator set

Give us the voltage and frequency for the 30 kW set and the destination site; our engineering team comes back with a configuration and quotation.

What we need from you

• Required power rating — this model or another rating in the 10–3,750 kVA range
• Voltage and frequency settings for your site
• Prime power or standby duty, and the application
• Destination port and required quantity

[email protected]

Request a quote

Our representative will contact you soon.

Your configuration: 30 kW mobile light tower (this model), 380/220 V, 50 Hz

Name

Email *

Company Name

Country

Mobile / WhatsApp                  Code                   +86 China                   +1 USA / Canada                   +44 United Kingdom                   +61 Australia                   +971 UAE                   +966 Saudi Arabia                   +27 South Africa                   +234 Nigeria                   +254 Kenya                   +91 India                   +62 Indonesia                   +63 Philippines                   +60 Malaysia                   +66 Thailand                   +84 Vietnam                   +55 Brazil                   +52 Mexico                   +7 Russia / Kazakhstan                   +49 Germany                   +33 France                

Mobile number *

Required power                  30 kW mobile light tower (this model)                   Other rating in the 10–3,750 kVA range                   Silent configuration                   Containerized configuration                   Mobile configuration                

Voltage                  380/220 V (standard)                   Other voltage — specify in message                

Frequency                50 Hz (standard)                 60 Hz                 Other — specify in message              

Application

Message

Send Inquiry

OEM/ODM and custom builds at 30 kW are quoted against the project specification.

2006+

Manufacturing since

100+

Countries served

2,000+

Sets delivered

20,000 m²

Manufacturing facility

Email: [email protected]

Phone: +86-13280035385