Intelligent 1.2MW Natural Gas Generator Set SCADA Control For Utility Scale Power Generation

Natural Gas Generator Set · 1200 kW Prime / 1320 kW Standby

A 1200 kW silent natural gas generator set for factory prime power

One platform, four build types — open frame, silent canopy, containerized or trailer-mounted — configured to your site, your fuel and your duty. Tell us the load and the site, and we will confirm the build type, rating and lead time.

1200 kWPrime power1320 kWStandby power380/220 VRated voltage50 HzRated frequency1500 rpmRated speedIP23Protection grade

Request a QuoteView Specifications

Manufacturing since 20062,000+ sets delivered100+ countriesLoad-tested before shipment

Natural gas · unrestricted service accessDiesel & gas · 10–3,750 kVA · 100+ countries

1200 kW Prime power

1320 kW Standby power

380/220 V Rated voltage

2006+ Manufacturer since

Product overview

Heavy-duty natural gas generator sets for sites without a reliable grid

One natural gas package package, 1200 kW prime and 1320 kW standby (1500 kVA), aimed at heavy industrial and project power.

This 1200 kW Natural Gas Generator Set is specified for mining and aggregate sites, district cooling and chiller plants, hospitals and institutional campuses. Typical duty for the 1200 kW set is continuous prime duty at high load factor, feeding main switchboards with motor-starting and step-load duty.

Assembly and full-load testing take place on Outevo’s own lines. The company has built diesel and gas sets including this 1200 kW class generator sets since 2006 at a 20,000 m² manufacturing facility served by a fully automatic line; over 2,000 sets have shipped to more than 100 countries.

The 1200 kW package is protected to IP23 or higher and can be uprated for dust, humidity, rain or heat.

• ✓1200 kW prime / 1320 kW standby at 380/220 V, 50 Hz, 1500 rpm
• ✓Full service access — gas piping and control panel open to inspection
• ✓Tier-1 diesel engine platforms — Cummins, Perkins, Weichai and Yuchai
• ✓Closed water-cooling with forced fan and large-capacity water tank
• ✓IP23 or higher, upgradable for dust, humidity, rain and heat

Product features

Engineered for site conditions, not for the showroom

Heavy-Duty Natural Gas Construction

The 1200 kW package is delivered assembled on its base frame, so installation inside or beside the production building is limited to positioning, fuel connection and cabling.

1200 kW Prime / 1320 kW Standby Duty

Design duty at 1200 kW prime and 1320 kW standby is continuous running through the working day, which is why the alternator and cooling system are sized for sustained load rather than short standby duty.

Tier-1 Natural Gas Engine Platforms

The engine is drawn from the Cummins, Perkins, Weichai and Yuchai platforms and matched to the alternator before full-load testing on our own production line.

Closed Water-Cooling with Forced Fan

Closed-circuit water cooling with forced fan and a large water tank is specified because a plant set runs for whole shifts and cannot rely on short cooling recovery periods.

Industrial Protection and Environmental Adaptability

Sealed dustproof, waterproof and anti-corrosion treatment to IP23 or higher, uprated for foundry dust, humid areas or high ambient workshops.

Flexible Configuration and Fast Deployment

ATS, remote monitoring, cable winch and quick connectors can be specified so the set can be redeployed between bays or buildings as the plant layout changes.

Specifications

Technical data — 1200 kW natural gas generator set diesel generator set

Standard natural gas package configuration at 1200 kW prime / 1320 kW standby (1500 kVA). Ratings, voltage and frequency are confirmed at specification.

Generator SetEngine & AlternatorControl & CoolingDimensions & Logistics

Related parameters	Parameter values
Power Capacity	Prime Power: 1200 kW   Standby Power: 1320 kW
Rated Voltage	380/220 Volts
Rated Current	Issued with the approved data sheet for the selected build
Rated Frequency	50 Hertz
Rated Speed	1500 rpm
Fuel Type	Diesel
Protection Grade	IP23 or higherUpgradable upon customization

Engine & alternator	Specification
Engine platform, standard	The engine platform for your order is confirmed at the specification stage
Alternative platforms	Cummins, Perkins, Weichai or Yuchai — the platform for your order is confirmed at order stage
Alternator	4-pole brushless, AVR-controlled — matched to the rating
Alternator brand options	Stamford, Leroy-Somer, Mecc Alte or Faraday
Matching	Engine, alternator and control system are matched to the rating and load profile you specify

Control & cooling	Specification
Cooling system	Closed water-cooling with forced cooling fan and large-capacity water tank, for stable temperature control under continuous load
Radiator design ambient	50 °C
Fuel system	Day-tank and fuel-system arrangement confirmed with the project specification
Control & protection	Configured to your project specification; optional automatic transfer switch (ATS) for automatic standby start, optional remote monitoring module
Ingress protection	IP23 or higher, upgradable upon customization

Dimensions & logistics	Value
Outline, natural gas (L × W × H)	Issued with the approved dimensional drawing for the selected build
Outline, silent canopy (same rating)	Issued with the approved dimensional drawing for the alternative build
Base frame	Fabricated steel skid, side-mounted natural gas layout
Net / gross weight	Supplied with the approved dimensional drawing and data sheet for your build
Container loading (20GP / 40HQ)	Supplied with the approved data sheet for your build
Basis	Standard natural gas configuration at this rating; refer to the approved dimensional drawing before installation design

Values above are published for the standard silent build at 1200 kW prime / 1,500 kVA, enclosure 12,192 × 2,438 × 2,896 mm. Refer to the approved drawing for your build before installation design.

Request the data sheetPrint this page

Engine & options

Specify the engine platform, control scheme and build

Engine platform Cummins · Perkins · Weichai · Yuchai Engines on the 1200 kW set are selected from the Cummins, Perkins, Weichai and Yuchai platforms and matched to the alternator; the platform for your order is confirmed at order stage.

Control & protection ATS & remote monitoring On the 1200 kW set an optional automatic transfer switch and remote monitoring module are available, with protection settings configured for continuous prime duty.

Build configuration This model ships as a natural gas package set, normally in a soundproof canopy This model ships as a silent set. Open frame, containerized and mobile builds of the same rating are available under OEM/ODM terms.

Applications

Where this 1200 kW natural gas generator set is used

1. Production lines and machine tools Carries the whole working-day load of the plant where the grid supply is either absent or too weak to run the line.

2. Compressors and process pumps Takes the starting current of large motors and keeps process pumps running without an operator restarting them after each trip.

3. Furnaces, dryers and ovens Holds process temperature through a shift, which is what prevents scrap and rework when the supply is unstable.

4. Cold storage and process cooling Keeps refrigeration and cooling loops live, protecting product that would otherwise be lost in a long outage.

5. Workshop and maintenance bays Runs welding, lifting and compressed-air equipment in the maintenance area independent of the main supply.

6. Shift-pattern continuous demand Suits plants that work two or three shifts, where the set is the primary source and fuel and service planning follows production hours.

Compare configurations

Open frame, silent or containerized?

Whichever build is chosen for the 1200 kW rating, engineering and testing are identical; only the enclosure, access and transport change.

Consideration	Natural gas (this model)	Silent	Containerized
Enclosure	Open steel base frame, no canopy	Soundproof canopy	40HQ container shell
Service access	Unrestricted — no panels to remove for routine maintenance	Through canopy access doors and monitoring windows	Through container doors and reserved access panels
Noise control	Not attenuated — natural gas layout	Multi-stage silencing structure and sound-absorbing materials	Container shell combined with silencing
Weight and transport	Lightest of the three builds	Heavier than natural gas	Container handling and ocean freight
Typical duty	Prime power on site; standby for factories and buildings	Noise-sensitive locations such as residential, commercial and healthcare sites	Rapid transport and deployment, remote and long-duration sites
Rated power of this model	1200 kW prime / 1320 kW standby	Quoted per project	Quoted per project
Protection grade	IP23 or higher, upgradable	Upgradable upon customization	Upgradable upon customization
Minimum order quantity	1 set	Quoted per project	Quoted per project

This model · 1200 kW natural gas generator set

Range · 10–3,750 kVA

Diesel & gas

Open frame · silent · containerized · mobile

All natural gas sets

Give us the power for the 1200 kW set, voltage and frequency and we will come back with a configuration.

FAQ

Frequently asked questions about this 1200 kW natural gas generator set

What power rating does this generator set provide?

This model is rated 1200 kW (1,500 kVA) prime and 1320 kW standby, built on the KTA50-GS8 engine with a silent canopy of 12,192 × 2,438 × 2,896 mm. It is intended for continuous prime duty, not standby only.

Which natural gas engines are available for this set?

Outevo assembles and load-tests every set before shipment; the same rating is available in open frame, containerized and mobile builds under OEM/ODM terms.

Natural Gas, silent or containerized — how do I choose?

Enclosure choice follows where the set is installed, not the rating. At 1200 kW the silent build suits a plant room or a yard close to occupied workshops; containerized and mobile builds use the same engine and alternator.

Can the voltage and frequency be customised?

Yes. 380/220 V and 50 Hz are the published standard for the 1200 kW rating, and voltage and frequency are set to the plant specification under OEM/ODM terms.

What is the minimum order quantity?

One 1200 kW unit is enough to start. Where the connected load grows with additional lines, parallel operation and load sharing are configured so capacity can be added without replacing the set.

How is the quality of each unit assured?

Every 1200 kW set is assembled and load-tested on our own production lines before shipment, with a data sheet and test record. Shanghai Outevo Machinery Co., Ltd. has manufactured generator sets since 2006 and delivered more than 2,000 units to over 100 countries.

Get a quote

Configure your 1200 kW natural gas generator set diesel generator set

Give us the voltage and frequency for the 1200 kW set and the destination site; our engineering team comes back with a configuration and quotation.

What we need from you

• Required power rating — this model or another rating in the 10–3,750 kVA range
• Voltage and frequency settings for your site
• Prime power or standby duty, and the application
• Destination port and required quantity

[email protected]

Request a quote

Our representative will contact you soon.

Your configuration: 1200 kW natural gas generator set (this model), 380/220 V, 50 Hz

Name

Email *

Company Name

Country

Mobile / WhatsApp                  Code                   +86 China                   +1 USA / Canada                   +44 United Kingdom                   +61 Australia                   +971 UAE                   +966 Saudi Arabia                   +27 South Africa                   +234 Nigeria                   +254 Kenya                   +91 India                   +62 Indonesia                   +63 Philippines                   +60 Malaysia                   +66 Thailand                   +84 Vietnam                   +55 Brazil                   +52 Mexico                   +7 Russia / Kazakhstan                   +49 Germany                   +33 France                

Mobile number *

Required power                  1200 kW natural gas generator set (this model)                   Other rating in the 10–3,750 kVA range                   Silent configuration                   Containerized configuration                   Mobile configuration                

Voltage                  380/220 V (standard)                   Other voltage — specify in message                

Frequency                50 Hz (standard)                 60 Hz                 Other — specify in message              

Application

Message

Send Inquiry

OEM/ODM and custom builds at 1200 kW are quoted against the project specification.

2006+

Manufacturing since

100+

Countries served

2,000+

Sets delivered

20,000 m²

Manufacturing facility

Email: [email protected]

Phone: +86-13280035385