High Performance 15kW Horizontal Wind Generator Low Cut-In Speed For Low Wind Speed Regions

The high-efficiency intelligent wind turbine is specially designed for the demand of clean, low-carbon, stable and long-term power supply. It adopts an integrated architecture, integrating advanced wind energy capture technology, intelligent control system and multiple protection designs, balancing environmental protection, reliability and convenient operation and maintenance. Taking renewable wind energy as the only energy source, the unit does not need to consume fossil fuels. Compared with traditional fuel and gas-fired units, it has core advantages such as zero emissions, zero pollution, low operation cost, sustainable energy and wide adaptability. It can be widely used in various scenarios such as onshore and offshore. Even under harsh working conditions such as high altitude, strong typhoon, high salt spray and heavy sand dust, it can still achieve continuous and stable operation, helping to realize the energy structure transformation and the "dual carbon" goal.

This wind turbine covers a full power range of 100-26000kW, integrating three modes: large-scale grid-connected power supply, distributed power supply and independent power supply. It is suitable for various scenarios such as large wind farms, industrial parks, commercial parks, remote infrastructure and public facilities. It provides green and efficient power solutions for enterprises and institutions, project sites and remote areas, realizes the efficient utilization and sustainable operation of wind energy resources, and promotes the upgrading of energy to cleanliness and low carbonization.

1.Integrated Design for Convenient Transportation and Deployment: Adopting an integrated unit architecture, it has a compact and stable structure. The blades, nacelle and tower are modularly designed, which can be quickly transported and installed with special transportation equipment and hoisting tools, without additional complex assembly. It is suitable for the transportation and rapid deployment needs of various onshore and offshore scenarios, and can be put into use after on-site commissioning, greatly shortening the construction cycle.

2.Full Set of Built-in Accessories for Easy Operation and Maintenance: The unit is equipped with a full set of core facilities such as intelligent control system, wind speed and direction monitor, pitch control system and braking system. The nacelle is reserved with special inspection ports, operation panels and status monitoring windows, supporting remote monitoring and fault early warning. It is convenient for daily inspection, fault troubleshooting, parameter debugging and real-time monitoring of operation status, reducing the difficulty of operation and maintenance and labor costs. The annual average availability of the unit is ≥99.2%.

3.Multiple Sealing and Protection for Strong Environmental Adaptability: The whole unit adopts sealed dust-proof, water-proof and anti-corrosion technology, and the offshore type is additionally equipped with a fully sealed anti-salt spray corrosion scheme, reaching high industry standards for protection level. It can resist complex and harsh environments such as high temperature, high humidity, heavy dust, rain and snow, strong typhoons, high salt spray and extreme temperature differences, and can be adapted to various scenarios such as high altitude, deserts, deep seas and coastal areas, ensuring the service life and operation stability of the unit. Among them, the offshore type can resist super typhoons of level 17.

4.Efficient Wind Energy Capture with Outstanding Power Generation Efficiency: Equipped with customized airfoil blades (carbon fiber or glass fiber material), adopting collaborative design of blade aerodynamics and structure, it has a high wind energy utilization coefficient (Cpmax≥0.72) and a large swept area (up to 77,000 square meters, equivalent to 10.5 standard football fields). Combined with the third-generation fully integrated semi-direct drive or direct drive technology route, it reduces energy loss, the power generation efficiency is 4%-8% higher than that of traditional models, and the unit kilowatt cost is reduced by more than 5%.

5.Flexible Customization and Adaptation for Efficient Operation: According to actual scene needs, it can accurately match power specifications, blade size and drive mode (direct-drive type, semi-direct-drive type, gearbox type). It supports customized installation of auxiliary devices such as remote monitoring module, automatic pitch adjustment, lightning protection system and energy storage module, simplifying the start-stop and grid-connection operation process, realizing the intelligent power generation mode of generating more power during peak electricity price periods and reducing capacity and extending service life during low electricity price periods, and improving project profitability.

6.Clean and Zero-Carbon Driven, Economical, Safe and Reliable: Taking renewable wind energy as the energy source, it has zero emissions, zero pollution and no noise (noise ≤50DB(A) at 10 meters above the ground), complying with global environmental protection control requirements. The unit is equipped with multiple safety protection systems (overvoltage, overload, overheating, lightning protection, typhoon early warning, blade feathering braking, etc.), with high operation safety factor. It does not need to consume fossil fuels, and the long-term comprehensive use cost is much lower than that of traditional fuel and gas-fired units. At the same time, the supply chain is completely independent and controllable, and key components are 100% localized.

1.Large-Scale Wind Farm Construction: Suitable for open onshore areas (such as the "Three Norths" regions including Inner Mongolia, Xinjiang and Gansu) and offshore medium and high wind speed sea areas (such as the coastal areas of Fujian, Guangdong and Hainan). Large-scale cluster deployment realizes centralized grid-connected power supply. A single 26-megawatt unit can generate up to 100 million kWh of electricity per year, which can meet the annual living electricity needs of 55,000 ordinary households and provide stable clean power support for the regional power grid.

2.Industrial Enterprise Power Supply: Suitable for industrial scenarios such as large factories, chemical parks and manufacturing bases. It can be used as the main or supplementary power supply source to provide stable power for production equipment, refrigeration and heating systems and office areas, replacing traditional fossil energy power supply, reducing enterprise carbon emissions and electricity costs, and helping enterprises achieve green and sustainable production.

3.Public Facility Power Supply: Suitable for public facilities such as urban parks, municipal squares, transportation hubs, grassroots hospitals and community service centers. It can be used as a distributed power supply system to provide power for lighting, communication and emergency equipment, and at the same time conform to the concept of urban green development, improving the environmental protection level of public facilities.

4.Remote Area Infrastructure: Suitable for infrastructure far away from the urban power grid, such as remote mountainous areas, border posts, rural water supply stations and plateau communication base stations. It can operate independently or form a small microgrid to provide continuous and stable power for equipment, solving the problem of electricity use in remote areas. Among them, the high-altitude model can adapt to the maximum altitude of 5370 meters.

5."Wind Power +" Integration Scenarios: Suitable for integrated scenarios such as "wind-fishery integration", "wind-solar-storage-hydrogen integration" and "zero-carbon island". For example, offshore floating wind turbines combined with aquaculture cages, onshore wind turbines combined with photovoltaic and energy storage systems, realizing the diversified utilization of wind energy resources, and at the same time driving the coordinated development of agriculture, fishery and tourism to achieve win-win results.

6.Temporary Emergency Power Supply: Suitable for temporary resettlement sites after natural disasters (such as earthquakes, floods and typhoons). It can be quickly deployed to provide power for temporary communication equipment, medical rescue equipment, domestic water purification devices and emergency lighting, ensuring the basic people's livelihood and the development of emergency rescue work, and helping post-disaster reconstruction.
 

Q: What do you need to know for fast communication and quotation?
It would be highly appreciated if you can provide details of your power capacity, voltage and frequency.

Q: What is your power range of generators?
Jining Digging Commerce Co., Ltd. provides generators with a power range from 10KVA to3000KVA.

Q: How can you guarantee the quality?
Quality is controlled through incoming material inspection,100% in-production checks, and random checks after packaging. We also provide timely spare parts and technical solutions for any machine failures.

Q: What about the lead time?
Typically, Jining Digging Commerce Co., Ltd. can deliver orders within 15-30 working days after receiving the prepayment.

Q: What is your payment terms?
We accept T/T, irrevocable L/C at sight, and Alibaba Trade Assurance credit payment. Payment terms can be adjusted for special orders or projects.

Q: What is your warranty?
Jining Digging Commerce Co., Ltd. offers a warranty of one year or 1000 hours (whichever comes first) from the ex-factory date. The warranty period may be extended for certain special projects.

Are you ready to use our container-type generator sets to solve your various power needs?Contact us today for a free consultation and a customized plan quotation.Our professional technical team is ready to provide you with adaptation suggestions and service support.Use our highly reliable container-type generator sets to ensure your power supply-here it is stable and convenient to walk together, both efficient and durable.

Email: [email protected]

Phone: +86-13280035385

Use our highly reliable container-type generator sets to ensure your power supply-here it is stable and convenient to walk together, both efficient and durable.